MILLING CUTTERS FOR INDEXABLE INSERTS

For Copy Milling / Ballnose Cutters
This copy milling cutters work with two kinds ball- and toric indexable inserts. Its V-shaped insert seat together with positive and frictional connection of inserts, cutter bodies and locating screws care for best results in finishing passes.
cutter-ballnose.jpg
cutter-ballnose.jpg
cutter-ballnose.jpg
cutter-ballnose.jpg
PlayPause
previous arrowprevious arrow
next arrownext arrow
Shadow
ntopic1.png
  • One cutter designed for both ball and toric style indexable inserts.
  • V-shaped insert seats for easy assembly of inserts.
  • Helical cutting edges ground in one single set-up leads to smooth cutting and improved surface finish.
  • Selected coatings and carbide grades available for precision machining and super fine finishing.
  • Specially designed for pre-finishing and finishing only.
ntopic2.png
斜坡 圓孔 溝槽 仿形 圓溝
ntopic3.png
P20、S45C...
ntopic4.png
ballnose-vseat.jpg
Rock Solid Clamping

Cutting insert clamping is highly accurate and rigid. Unique V-pocket design gives a truly positive seat for the insert and will not allow insert movement when milling with a side thrust. "Sandwiched" insert clamping with single locking screw is unsurpassed for rigidity.

The advanced design of 3DMILLING inserts eliminates heat-seizing of locking screws or insert movement due to costly locating screws or pins of less advanced design. Positive V-pocket seating eliminates mismatch when changing to fresh inserts. It also eliminates the need to program new length or diameter offsets.

  • Ordering Number Diameter of Cut
    D1    		 Overall Length
    L1    		 Diameter of Shank
    D2
    Radius
    R

    B
    Flutes
    Z    		 HREAD TORX SIZE
    B10R500L130-A 10 130 10 5 30 1 M 4.0 T15
    B12R600L130-A 12 130 12 6 30 1 M 5.0 T20
    B16R800L130-A 16 130 16 8 35 1 M 5.0 T20
    B20R100L130-A 20 130 20 10 35 1 M 5.0 T20

  • Ordering Number ISO Code Grade Coating
    Length
    l
    Thickness
    s    		 Actual Radius
    r    		 Screw Application
    ROHX10XX-P25 ROHX 10XX P25 HYPERLOX 10 2.5 5 M4 P
    ROHX12XX-P25 ROHX 12XX P25 HYPERLOX 12 2.5 6 M5 P
    ROHX16XX-P25 ROHX 16XX P25 HYPERLOX 16 3 8 M5 P
    ROHX20XX-P25 ROHX 20XX P25 HYPERLOX 20 3 10 M5 P

  • Operation Data

    進給與切深：
    材料 參數 P20 K10
    一般鋼材 每刃切削量 (fz) 0.5-2.0 -
    切深 (ap) 0.3-1.0 -
    鑄鐵 每刃切削量 (fz) - 0.5-2.2
    切深 (ap) - 0.2-1.2
    熱處理後鋼材 每刃切削量 (fz) - 0.2-1.0
    切深 (ap) - 0.2-0.5

  • Example of Machining

  • Catalogs & Flyers

Professional distributor & manufacturer, we provide you machining technology and total solution of products, not only products, but also increasing your competetiveness

LINKS

CONTACT

  • Chou & Hsieh Co., Ltd.
  • 2F, No. 82-1, Sec. 1, Guanfu Rd., Sanchong Dist., New Taipei City, 24158, Taiwan

  • TEL: 02-85124699
  • FAX: 02-85124709
  • sales@3dmilling.com.tw